Свойство фильтра CSS
Пример
Измените все изображения на черно-белые (100% серый):
img {
filter: grayscale(100%);
}
Совет: Ниже приведены дополнительные примеры из раздела "Попробуйте сами".
Определение и использование
Свойство filter
определяет визуальные эффекты (такие как размытие и насыщенность) для элемента (часто <img>).
Значение по умолчанию: | никто |
---|---|
Унаследовано: | нет |
Анимация: | да. Читать об анимации |
Версия: | CSS3 |
Синтаксис JavaScript: | объект .style.filter="оттенки серого (100%)" |
Поддержка браузера
Цифры в таблице указывают на первую версию браузера, которая полностью поддерживает это свойство.
Цифры, за которыми следует -webkit-, указывают на первую версию, которая работала с префиксом.
Property | |||||
---|---|---|---|---|---|
filter | 53.0 18.0 -webkit- |
13.0 | 35.0 | 9.1 6.0 -webkit- |
40.0 15.0 -webkit- |
Синтаксис CSS
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
Совет. Чтобы использовать несколько фильтров, разделите каждый фильтр пробелом (см. «Дополнительные примеры» ниже).
Функции фильтра
Примечание . Фильтры, использующие процентные значения (например, 75%), также принимают значение как десятичное (например, 0,75).
Filter | Description | Play it |
---|---|---|
none | Default value. Specifies no effects | |
blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. |
|
brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. |
|
contrast(%) | Adjusts the contrast of the image. 0% will make the image completely black. 100% (1) is default, and represents the original image. Values over 100% will provide results with more contrast. |
|
drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to the box-shadow property. |
|
grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely gray (used for black and white images). Note: Negative values are not allowed. |
|
hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. |
|
invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. |
|
opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to the opacity property. |
|
saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. |
|
sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. |
|
url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) |
|
initial | Sets this property to its default value. Read about initial | |
inherit | Inherits this property from its parent element. Read about inherit |
Дополнительные примеры
Пример размытия
Примените эффект размытия к изображению:
img {
filter: blur(5px);
}
Пример размытия 2
Примените размытое фоновое изображение:
img.background {
filter: blur(35px);
}
Пример яркости
Отрегулируйте яркость изображения:
img {
filter: brightness(200%);
}
Контрастный пример
Отрегулируйте контрастность изображения:
img {
filter: contrast(200%);
}
Пример тени
Примените эффект тени к изображению:
img {
filter: drop-shadow(8px 8px 10px
gray);
}
Пример оттенков серого
Преобразуйте изображение в оттенки серого:
img {
filter: grayscale(50%);
}
Пример поворота оттенка
Примените поворот оттенка к изображению:
img {
filter: hue-rotate(90deg);
}
Инвертировать пример
Инвертируйте сэмплы на изображении:
img {
filter: invert(100%);
}
Пример непрозрачности
Установите уровень непрозрачности изображения:
img {
filter: opacity(30%);
}
Пример насыщения
Насыщаем изображение:
img {
filter: saturate(800%);
}
Пример сепии
Преобразуйте изображение в сепию:
img {
filter: sepia(100%);
}
Использование нескольких фильтров
Чтобы использовать несколько фильтров, разделите каждый фильтр пробелом. Обратите внимание, что порядок важен (т. е. использование оттенков серого() после sepia() приведет к полностью серому изображению):
img {
filter: contrast(200%) brightness(150%);
}
Все фильтры
Демонстрация всех функций фильтра:
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Связанные страницы
Учебное пособие по CSS: CSS-изображения
Справочник по HTML DOM: свойство фильтра